Brute Magnetics Double Sided Round Neodymium Magnet with Eyebolt, Combined...

Description

Brute Magnetics Double Sided Round Neodymium Magnet with Eyebolt, Combined 800 LBS Pulling Force, 2.95" Diameter
Product Details
Is Discontinued By Manufacturer ‏ : ‎ No
Product Dimensions ‏ : ‎ 3.82 x 2.95 x 1.3 inches; 2.5 Pounds
Manufacturer ‏ : ‎ Brute Magnetics
Specifically designed for magnet fishing with combined 800lbs pulling force! Two magnets provide twice the surface area to catch targets.
Never worry about the orientation of your magnet when dragging underwater. Two magnets ensure its never facing the wrong way!
Magnets are neodymium iron boron (NbFeB) rare earth with Nickel-Copper-Nickel coated steel cup
Package includes one double sided magnet, M10 eyelet and 6ml bottle of medium strength 242 threadlocker
Improved design for 2018! This magnet was specifically designed with magnet fishing in mind. You won't have to worry which way the magnet is oriented under water since each side provides up to 400lbs of pulling force. The new design provides more versatility by allowing it to be used as a double sided, or single sided magnet. The eyebolt can screw into the side of the casing, or through the magnet face. Using this magnet in the single sided configuration will provide a stronger hold since the user is pulling perpendicular to the target. Includes two M10 eyelets. This magnet is made with A3 steel plate and coated with Nickel-Copper-Nickel to be the strongest and most durable type of permanent magnet available. Please note that holding power of 800 lbs is a combined maximum weight between the two magnets. Each side will produce around 400 lbs of pulling force. Includes 6ml bottle of thread locker to keep the eyebolt from backing out. Specifications: Dimensions: 2.95” x 1.00” Hole Diameter: .39” (10mm) Material: Two NdFeB Magnets + A3 Steel Coating: NiCuNi Pulling Force: 800 lbs (combined) HOW THE PULLING FORCE IS TESTED The forces have been determined at room temperature on a plate of polished steel (A36) with a thickness of 1/2 pull force is applied perpendicular to the face of the plate. A maximum deviation of -10% compared to the specified force is possible in exceptional cases, generally the value is exceeded. Depending on the type of application (thickness/condition of base metal, temperatures, and direction of pull), the forces can be influenced enormously. Mounting on vertical surfaces can reduce the pulling force by up to 70%.