RGC Platform Hoist Plywood and Truss Carrier

Description

The RGC Platform Hoist Plywood and Truss Carrier is available in options of 200lb. and 400lb. carriers that are both 7 in. The 200 lb. carrier accessory weighs 13 lbs. while the 400 lb. carrier accessory weighs 11 lbs. These attachments can both carry sheets of plywood with either 4ft. or 8ft. in dimension up/vertical, but the stack must be tilted into the vertical plane by the worker to slide it out of the carrier for unloading, and materials should be held up against the track with a rope that is fastened to the carrier and held by the above worker at the loose end. Wheels can be removed to accommodate extra load thickness, and load brackets can be bolted using the hardware and platform stop holes in the carrier. Platform braces must be removed to allow the platform to drop down in a vertical position.
Please Note:
For the Pro 225, the two platform braces are removed for vertical positioning and for the Pro 400, the #18 platform stops and the two #8 platform braces must be removed for vertical positioning.
Features
Carrier accessory
Can carry sheets of plywood
Equipped with platform stop holes
Wheels can be removed to accommodate extra load thickness
Load brackets can be bolted using the hardware and platform stop holes in the carrier
Specifications
Carrier Size: 7in./li>
Weight Capacity: 200lbs. or 400lbs.
Plywood Vertical Plywood Dimension: 4ft.or 8ft.
Carrier Accessory Weight: 200lb. (P225) Capacity: 13lbs.; 400lb. (PRO400) Capacity: 11lbs.
Helpful Documents
Instruction Manual